What is Cerakote?
Cerakote technology is formulated on a proprietary ceramic backbone. The formulation used for Cerakote Firearm Coatings enhances a number of physical performance properties. Each of these properties is rigorously tested to guarantee that Cerakote products remain at the forefront of the firearm coatings market.
How Does It Compare To Other Firearm Finishes That Have A Long Standing Presence In The Firearms Industry?
To prove Cerakote is the leading firearm coating, NIC Industries, Cerakote's parent company, hired an independent military testing facility to perform a blind side by side comparison between Cerakote and other firearm finishes. In every test Cerakote out performed both competitors products. All tests were performed in accordance with ASTM testing standards.
Temperature Durability
H-series to 700f degrees.
C-series to 1,200f degrees.
Abrasion Durability
Taber abrasion testing was performed
by rotating an abrasive disk on the coated surface of a substrate to determine
the durability of a coating. Test results indicate that Cerakote provides up to
7-1/2 times more wear resistance than other firearm finishes. One test had
competitors' products failing between 500 and 600 cycles, where Cerakote did
not fail until 8000 cycles. This test was in compliance with ASTM standard
D4060.
Flexibility tests indicate that
Cerakote can undergo a 32% elongation and withstand 160 lbs/sq in impact with
no coating loss. This test was in compliance with ASTM standard D522.
What about its reliability in preventing corrosion?
Corrosive salt spray testing was
performed using a steel substrate to simulate real-world application on a
firearm. Test results indicate that Cerakote can protect steel 50 times better
than other firearm finishes. After 385 hours of 5% spray, the Cerakote coated
items had no corrosion, unlike the other finishes. This test was in compliance
with ASTM standard B117.
We have conducted extensive testing on our own guns to ensure that the finishes we provide would be extremely durable for our customers before we ever accepted one order from the public. We have been very impressed with the results of our informal testing as well as the formal product testing as noted herein.
How Long Is Your Turn-Around Time?
A one week turn-around is common. (Less shipping time) We will do our best to provide prompt turn around.
How Much Does It Cost?
Prices vary based on the complexity of the job call or email for a quote please be specific in your request as we want to ensure that your new finish is exactly how you want it to be at a price you expect to pay.
What about customer service?
We strive to make every customer satisfied with his or her new finish and we are sure you will be happy with the end product.
Can this finish be applied to other items as well?
Absolutely. We have applied our finishes to many items that receive far harder use than firearms.
How about pistons in a steam engine! Firearms magazines, knives, tools etc. If you have a non-firearm application you would like to discuss feel free to give us a call or an email.
Also, here is a link to Cerakote. http://www.nicindustries.com/cerakote.php